Service & Maintenance

Applications

• Trip Testing of High-voltage Circuit Breakers in Power Transformer Installations
• Equipotential Bonding Test of Electric Vehicles (EV)
• Zero-voltage Measurement of Electric Vehicles
• Why Voltage Inspections of High Voltage Photovoltaic Power Generation Facilities Need CAT III Measuring Instruments
• Automatic partial discharge (RPDIV) using impulse voltages as defined in IEC 61934
• Management of Measurement Data for UPS Sites to Facilitate the Digital Transformation
• Deterioration Judgment of Stationary Lead-Acid Batteries
• DC Large Current and Power Conversion Efficiency Measurement of Plating System Power Supplies
• On-site Inverter Measurement
• Verify the Power Quality and Efficiency of an EV fast charger
• TDD Measurement as Specified in the IEEE519 Standard
• Verify Fault Ride-Through (FRT) Capabilities in Equipment and PV Systems
• Inspect the Stress on Factory UPS Caused by Voltage Dips
• Measure Periodical Instantaneous Voltage Drops
• Measure Transient Voltage Waveforms
• Investigate the Cause of Tripped Circuit Breakers at Construction Sites
• Easily Deliver Reports on Insulation Resistance Integrity for Annual Inspections
• Fast, Precise Reporting of Malfunctions and Potential Issues
• Create Reports with Illuminance Measurements during Building Inspections
• Record Encoder Pulse Output to Verify Motor Operation
• Manage soil moisture
• Record the Water Level of a River
• Measure Irradiance and Temperature Wirelessly when Testing PV Installations
• Measure the Instantaneous Power Failure and Voltage Drop of Utility Power Supplies (50/60 Hz)
• Measuring the heat generated by electronic components
• Verify correct operation of your radiant heating and cooling (HVAC) system
• Log 4 to 20 mA Current for Instrumentation, Distributor, etc.
• Data Acquisition and Assessment in Railway Car Trial Runs (Train)
• Streamline Connections when Auditing the Energy Profile of Multiple Loads
• Measuring the Surface Resistance of Industrial Materials
• Finding the Cause of Creaking Noise from Door Sashes
• How to Meet Public Lighting Requirements
• Verify that Large Equipment Have the Same Electrical Potential
• How to Evaluate Machine Oil Quality
• Test the Electrical and Mechanical Condition of Aircraft Frames
• Ambient room monitoring at data centers
• Simple Method for Evaluating Strings of PV Cells
• Operational Testing of Multiple-circuit Protective Relays
• How to Measure the Performance of Insulation Paper
• Development and Evaluation of Electric Vehicle (EV) Quick Chargers
• Test the operational timing of circuit breakers in power industries
• Measure the Transient Voltage in Glowing Fluorescent Lights
• How to Properly Test Light Switches
• Manage the Voltage of Lead-acid Storage Batteries
• Leak Current Measurement of Medical Equipment Compliant with the IEC60601-1 Ed.3.2:2020
• Measure Lightning-induced Voltage Dips in a Low-Voltage Circuit
• Measure Fan Speed Rotation
• Testing UPS Switching Time[2992.96KB]
• Test the Deterioration of Stationary Lead-acid Batteries
• Measure Voltage Drop Caused by Wiring Impedance
• Contact Measurement of Rotation Speed
• Maintenance of Dynamic Uninterruptible Power Supplies[2805.64KB]
• Measure the Insulation Resistance of Solar Cell Panels
• Check the Deterioration of Oil Capacitors in Train Cars
• Measure Water Level Changes in a Well[1085.86KB]
• Evaluation of Input and Output Characteristics of Power Conditioners
• Train Track Corrosion Prevention Maintenance
• Measure Energy Savings Using a Small Clamp Logger
• Measure the Earth Potential in order to Select the Appropriate Electric Anticorrosion Method[2204.23KB]
• Evaluation of Input and Output Characteristics of Inverters
• Test for Abnormal Waveforms when Switching to UPS Power
• On-site power efficiency measurement of an EV fast charger
• Electrical Potential Measurement for Galvanic Protection(in Galvanic Anode Systems)
• Evaluate Data Center Infrastructure Efficiency and Power Usage Effectiveness
• Save Energy by Eliminating Waste from Lighting
• Power Failure Test of Uninterruptible Power Supply (UPS) Systems[871.68KB]
• Monitor for Differences in the Temperature/Humidity[1287.87KB]
• Test the Voltage after Replacing an LED Lighting Fixture
• Saving Energy by Reviewing Air Conditioning Settings
• Improve Air-conditioner Operating Conditions
• Measure the Insulation Resistance of Electric Vehicles
• Verify the Energy Savings Created By Photovoltaic (PV) Systems
• Measure the High-Order Harmonic Voltage and Current of Power Lines
• Logging Measurements using a Wireless Local Area Network
• Environmental Measurements in Conjunction with Gas Analyzers
• Managing the Temperature/Humidity during the Curing of Concrete
• Measuring Air Conditioner Outlet Temperature[1287.23KB]
• Power Quality Survey of Solar Power Generation Systems
• Reviewing PC Standby Power to Save Energy
• Evaluate the Input/Output Characteristics of a Power Conditioner for Mega Solar Power Generation
• How to Measure the Temperature of a Motor Shaft[479.58KB]
• Measure the Noise Generated by Switching Power Factor Correction Capacitors